Get Aerospace Engineer Jobs

Deburr Hand/Metal Finisher


  • MB Aerospace
  • 09/01/22
  • Sterling Heights, MI
  • 48312
  • Full-Time
Responsible for tapping holes, performing assembly operations, and removing sharp edges, raised metal and surface imperfections generated from various machining operations on a variety of materials to achieve surface finish as required by customer specifications utilizing various hand tools such as pneumatic die grinders, files and other related equipment by performing the following duties:
Working knowledge of blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece and sequence of operations.
Key Responsibilities
Operate all deburring equipment required in the performance of the position.
Ability to achieve the required edge break and/or radius as required by work instructions.
Knowledge of deburring media and the selection of the proper type as defined by the work instructions.
Knowledge of customer specifications pertaining to visual non-conformances and surface finishes.
Ability to perform hand drilling and drill press operations.
Tap holes and perform assembly operations.
Utilize measuring equipment such as height gage, micrometers, calipers, radius gages, thread gages, etc., as applicable.
Ability to read, interpret and work from blueprints, sketches, or product specifications.
Complete required documentation related to work order.
Demonstrate good organizational skills.
Maintains good housekeeping practices at all times.
Understands, implements and maintains the Company's quality policy in the performance of all duties and responsibilities.
In the scope of performance of duties and responsibilities, ensures that requirements of society, including laws, statutes, rules and regulations, codes, environmental considerations, health and safety factors, and conservation of energy and materials are understood, implemented and maintained.
In the performance of duties and responsibilities if assigned to the Repair Station, assumes responsibility for ensuring compliance with the Company's FAA Inspection Procedures Manual and FAR 65, as amended.
Ensures compliance with applicable federal, state and local laws and regulations. Completes all required compliance training. Maintains knowledge of and adhere to MB Aerospaces internal compliance policies and procedures. Takes responsibility to keep up to date with changing regulations and policies.
Job Requirements
High school diploma or general education degree (GED); or one to two years related experience and/or training; or equivalent combination of education and experience.
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand, walk, sit, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to climb or balance; stoop, kneel, crouch; and smell. The employee must regularly lift and/or move up to 25 pounds and frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate to loud.
Maintain a neat and orderly workstation and promote overall good housekeeping practices
Other related duties as assigned by the supervisor
MB Aerospace is an Equal Opportunity Employer. MB Aerospace is a subcontractor to the United States Government and provides defense services involving technical date and products governed by the Arms Export Control Act and the International Administration Regulations (ITAR), 22 C.F.R. parts 120-120 and the Export Administration Act and the Export Administration Regulations (EAR), 15 C.F.R parts 730-774 (Export Laws). All candidates are subject to review and governance under such Export Laws and any offer of employment may be subject to additional considerations and/or conditions.
MB Aerospace is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other protected class. MB Aerospace is committed to ensuring that its online application process provides an equal opportunity to all job seekers, including individuals with disabilities. If you believe you need a reasonable accommodation in order to search for a job opening or to submit an application, please contact us.
NO THIRD PARTY VENDORS

Job Closed

This position is currently filled/closed/expired, please click here to search for similar positions.

Critical Need Jobs

Aerospace Proposal Engineer
Auburn Hills, MI
Mechanical Engineer - Structures
Sterling Heights, MI
Sales Engineer
Troy, MI
KBE Engineer -
Auburn Hills, MI
KBE Engineer
Auburn Hills, MI

Employer Information

Browse other Aerospace Engineer Jobs in Michigan

  1. Aerospace Proposal Engineer

    Auburn Hills, MI
    Description Aerospace ProposalProposal Engineer Marpossdegree in Aerospace or MechanicalMechanical Engineering *
  2. CAE Durability Engineer

    Troy, MI
    Bachelor's degree in Structural/Mechanical/Civil/Aerospace Engineering from an ABET accredited University. 1+ years of experience
  3. Mechanical Engineer - Structures

    Sterling Heights, MI
    for more well rounded engineering experiences. BS in Mechanical or Aerospace Engineering
  4. Sales Engineer- Automation

    Troy, MI
    Seeking a Sales Engineer for Automation EquipmentTier 1 Automotive, Aerospace, and Industrial Manufacturing
  5. Sales Engineer

    Troy, MI
    Detroit Job Segment: Sales Engineer, Aerospace Engineering, CRM, Mechanical
  6. KBE Engineer -

    Auburn Hills, MI
    training other Catia/NX engineers on modeling techniquesMechanical, Aeronautical/Aerospace, from an ABET
  7. KBE Engineer

    Auburn Hills, MI
    training other Catia/NX engineers on modeling techniquesMechanical, Aeronautical/Aerospace, from an ABET
  8. Manufacturing Engineer

    Warren, MI
    Manufacturing Engineer position for an Aerospace Company inmanufacturing engineering team * Improve
  9. Mechanical Engineer

    Troy, MI
    Bachelor"s Degree in Engineering, mechanical or related field - Masterfacilities: - Automotive - Aerospace - Food production - C...
  10. System Engineer eMobility - Functional Safety

    Troy, MI
    well as key players in the aerospace and industrial sectors, we offerResponsibilities As as System Engineer eMobility - Functiona...